HIKROBOT MV-CT0CG0016/G/NN/NN — Area Scan Cameras

The HIKROBOT MV-CT0CG0016/G/NN/NN is the GigE-interface BASE model of the third-generation CT series area scan camera family. With a 1/2.9″ optical format, its global shutter stacked BSI CMOS sensor has a 3.45 µm × 3.45 µm pixel size and produces color images at 1440 × 1080 resolution (1.6 MP), reaching up to 78.2 fps. A 68.3 dB dynamic range and 44 dB signal-to-noise ratio preserve detail even under variable lighting. The smaller 3.45 µm pixel packs higher resolution into a compact sensor area without enlarging the optical format. Exposure time is adjustable from 23 µs to 10 s and gain from 0 dB to 24 dB, offering flexibility for fast scenes and low-light conditions alike. The global shutter architecture images moving objects without distortion, allowing the 78.2 fps frame rate to be used reliably in in-line applications.

The camera transmits data over Gigabit Ethernet (1000 Mbit/s) through an RJ45 connector, remaining backward compatible with Fast Ethernet (100 Mbit/s); there is no separate control connector, with control signals handled over the data interface. Power is supplied in the 9–24 VDC range, and PoE support lets power and data share a single cable, with typical consumption of 1.4 W at 12 VDC. The 29 mm × 29 mm × 42 mm housing weighs approximately 116 g and uses a C-Mount lens interface. Protection class is IP40 when the lens and cables are correctly installed, with an operating temperature range of -30 °C to 60 °C. Compliance with GigE Vision V2.0 and GenICam standards ensures smooth integration with third-party vision software.

Specifications

Key features

• Integrated lens and illumination. The MAX version integrates the lens and light source into the body; lens focusing and illumination control are handled from the camera.
• 100 metre cable reach. The Gigabit Ethernet interface transmits up to 100 metres without a relay; PoE allows power over a single cable.
• Open standard compliance. Works seamlessly with the GigE Vision V2.0 protocol, the GenICam standard and third-party software built on them.
• Waterproof connection. PRO and MAX versions use a fully waterproof M12 X-Code connector; IP67 is reached when correctly installed.
• Precision temperature control. PRO and MAX versions include a precision temperature control design for fast heat balance, which keeps measurement stable over long cycles.
• Automatic colour correction. Colour models of the PRO and MAX versions support auto colour correction based on multi-spectral fusion technology.

Where it is used

The balance of up to 78.2 fps frame rate and 1.6 MP resolution suits mid-scale part inspection, counting, and positioning tasks that need both speed and image detail. Exposure as short as 23 µs supports sharp image capture on moving lines. The PoE-enabled Gigabit Ethernet interface simplifies installation with a single cable, while the compact 29 × 29 × 42 mm housing fits space-constrained mounting points.

Suitability depends on working distance, field of view, line speed and surface characteristics. Selection is assessed on a per-project basis.