HIKROBOT MV-LE200-120W24-4TD — Lighting

4-channel, 120 W/24 V digital light controller, remotely manageable via RJ45 network interface or DB9F serial port.

HIKROBOT MV-LE200-120W24-4TD

Status: Available

HIKROBOT part no.: SM000039379

Request a quote and stock check

This is the first LE200 model to add network control: it can be managed over UDP through its RJ45 network interface or via DB9F serial port, alongside the usual panel buttons. Each of its 4 channels outputs up to 3 A, with total current reaching 5 A; a wide 100-240 VAC input range and fan cooling suit its higher power density. It carries 4 opto-isolated inputs and 4 opto-isolated outputs, in a 130×83.8×169.5 mm, 733 g enclosure.

Specifications

Light Controllers
ModelMV-LE200-120W24-4TD
Performance
Drive modeDigital, constant voltage
Lighting modeContinuous, strobe
PWM frequency125 kHz
Strobe overdriveNot support
Channel4-channel
Dimming modeControl panel (via pressing button), software (serial port or network interface)
Brightness level0 to 255
Lighting response time< 10 μs
Trigger modeExternal trigger and internal trigger
Communication protocolUDP, Serial
Applicable productRing light, bar light, flat light, coaxial light, etc.
Electrical feature
Input voltage100 VAC to 240 VAC, 50 Hz/60 Hz
Input current2.1 A (115 VAC), 1.2 A (230 VAC)
Output voltage24 VDC
Output currentMax. 5 A
Output powerMax. 120 W
Output current for each channelMax. 3 A
Trigger inHigh level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC
Trigger outHigh level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC
Mechanical
Power supply interfaceC13 220 VAC interface
Console interfaceRJ45 network interface, DB9F serial port
Digital I/OOpto-isolated input × 4, opto-isolated output × 4
Lighting output connectorSMR-03V-BC
Dimension130 mm × 83.8 mm × 169.5 mm (5.1″ × 3.3″ × 6.7″)
Shell materialPlastic
WeightApprox. 733 g (1.6 lb.)
TemperatureWorking temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity20% RH to 85% RH (no condensation)
Ingress protectionIP30
Cooling modeFan cooling
General
CertificationCE, KC
HIKROBOT part no.SM000039379
StatusAvailable

Key features

  • Supports different control modes of light source, including control panel and software.
  • Supports using serial port or network interface to set parameters and manage the device.
  • Provides multiple I/O interfaces for external trigger.
  • Supports installation via slide rail or screw hole.
  • Supports overcurrent, overload, short circuit protection.

Where it is used

Used on production lines where 4 light sources are managed centrally over the network with remote parameter control.

Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.

Is this lighting product right for your application?

Let us determine light source, controller and mounting compatibility together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.

Request a quote Other models in the series

The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.

Source: HIKROBOT product data

← Light Controllers

Other models in this series