HIKROBOT MVL-HF1628M-6MPE — Lenses
16 mm, F2.8 to F16, Ø9 mm (1/1.8″), C-mount
The MVL-HF1628M-6MPE is a fixed-focal C-mount lens at 16 mm, built for 1/1.8″ 6 MP area-scan cameras. This focal length narrows the field of view further, allowing the camera to sit a bit farther from the target while magnifying smaller details. According to HIKROBOT, the lens preserves geometric shape thanks to ultra-low distortion, which matters most for tasks that measure edges and corners.
Specifications
| 1/1.8″ 6 MP FA Lens | |
|---|---|
| Model | MVL-HF1628M-6MPE |
| Performance | |
| Focal length | 16 mm |
| F-number | F2.8 to F16 |
| Image size | Ø9 mm (1/1.8″) |
| Distortion | –0.018% |
| Minimum object distance | 0.1 m |
| Field of view | D(8.96mm):31.28° H(7.38mm):25.94° V(4.92mm):17.48° |
| Mechanical | |
| Iris control | Manual |
| Focus control | Manual |
| Filter thread | M27 × P0.5 |
| Mount | C-mount |
| Flange back length | 17.526 mm |
| Dimension | Ø33 mm × 31.9 mm (Ø1.3″ × 1.3″) |
| Weight | 56.1 g (0.1 lb.) |
| Temperature | –10 °C to 50 °C (14 °F to 122 °F) |
| General | |
| Certification | RoHS 2.0 |
| Product identity | |
| HIKROBOT part no. | M000048146 |
| Status | Available |
Key features
- Higher image clarity and contrast ratio
- Ultra-low distortion and higher relative illumination rate
- Good optical performance at ultra-short working distance
- Compact design, convenient for device integration
Where it is used
The 16 mm focal length suits inspection stations where the camera must stand a bit farther from the object while still resolving small-scale detail clearly. In dimensional checks such as edge straightness or hole-diameter measurement, the low distortion helps keep measurement error down. It is a reasonable fit for assembly lines with limited clearance, where the camera has to sit slightly off to the side of the line rather than directly above it.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this lens right for your application?
Let us determine focal length, sensor size, working distance and field of view together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data