HIKROBOT MV-CE013-80GM — Area Scan Cameras
1.3 MP, CMOS SS Sensor, GigE, Mono, 89.9 fps
The MV-CE013-80GM is a 1.3 MP mono member of HIKROBOT’s economical CE Series GigE area scan line, built around a global shutter CMOS sensor. At 1280×1024 it reaches up to 89.9 fps with a 40 dB SNR and 60 dB dynamic range, positioning it for fast, repetitive inspection tasks. HIKROBOT lists this model under ‘Delisting Preparation’ status in its catalog.
Over its Gigabit Ethernet interface the camera supports cable runs up to 100 meters without a repeater, and its 6-pin Hirose connector carries both power and I/O — one opto-isolated input, one opto-isolated output, and one bidirectional non-isolated line. Alongside 9–24 VDC external power it supports PoE, and offers hardware trigger, software trigger, and free-run modes. Compliance with GigE Vision V2.0 and GenICam lets it work directly with the MVS client and third-party machine vision software.
Specifications
| CE Series — Economical Area Scan | |
|---|---|
| Model | MV-CE013-80GM |
| Performance | |
| Sensor type | CMOS, global shutter |
| Sensor model | SS |
| Pixel size | 4.0 μm × 4.0 μm |
| Sensor size | 1/2.7″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 89.9 fps @ 1280 × 1024 |
| Dynamic range | 60 dB |
| SNR | 40 dB |
| Gain | 0 dB to 20 dB |
| Exposure time | 31 μs to 1 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Mono | Mono |
| Pixel format | Mono 8/10/10p/12/12p |
| Binning | Supports 1 × 1, 2 × 2 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.4 W@12 VDC |
| Mechanical | |
| Lens mount | C-mount |
| Dimension | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 96 g (0.21 lb.) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenlCam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | SM000036821 |
| Status | Being discontinued |
Key features
- Adopts GigE interface and max. transmission distance of 100 meters without relay.
- Supports auto and manual adjustment for exposure control, LUT, Gamma correction, etc.
- Supports hardware trigger, software trigger, free run, etc.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on protocol and standard.
Where it is used
The combination of 1280×1024 resolution and roughly 90 fps suits this model to time-critical, mono-sufficient tasks such as presence/position checks, part counting, or simple pattern verification on fast-moving lines. It fits well on assembly and packaging lines with high conveyor speeds.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data