HIKROBOT MV-CI013-GS-TF — Area Scan Cameras
1.3 MP, Sony IMX990, InGaAs SWIR, GigE, TEC+Fan, Mono, 91 fps
The MV-CI013-GS-TF uses the InGaAs Sony IMX990 sensor for short-wave infrared (0.4-1.7 μm) imaging — a different technology from the uncooled vanadium oxide thermal detector in the rest of the family, delivering spectral imaging rather than thermal temperature measurement. Reaching 91 fps at 1280×1024 with 52.2 dB SNR and 56 dB dynamic range, it is the TEC+fan-cooled variant of the CI013 SWIR sub-family, giving it the highest thermal stability of the three. It offers two exposure modes: ultrashort (3-7 μs) and standard (8 μs-0.1 s).
GigE Vision V2.0/GenICam compatible, the camera offers a rich I/O set through its 12-pin P10 connector including RS-232, plus opto-isolated in/out and bidirectional non-isolated I/O. TEC cooling drives 11.7 W consumption, so it runs on 9-24 VDC only, with no PoE listed. The C-mount, 58×58×82 mm housing works with the MVS client and GenICam-based third-party software.
Specifications
| CI Series — Long-Wave Infrared | |
|---|---|
| Model | MV-CI013-GS-TF |
| Performance | |
| Sensor type | InGaAs |
| Sensor model | Sony® IMX990 |
| Pixel size | 5 μm × 5 μm |
| Sensor size | 1/2″ |
| Resolution | 1280 × 1024 |
| Max. frame rate | 91 fps @ 1280 × 1024 |
| Dynamic range | 56 dB |
| SNR | 52.2 dB |
| Gain | 0 dB to 18 dB |
| Exposure time | UltraShort exposure mode: 3 μs to 7 μs Standard exposure mode: 8 μs to 0.1 sec |
| Exposure mode | Off/Once/Continuous exposure mode |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Electrical feature | |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), RS-232 × 1 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 11.7 W @ 12 VDC (TEC enabled) |
| Mechanical | |
| Lens mount | C-mount |
| Installation method | Installation via three-side screw holes |
| Dimension | 58 mm × 58 mm × 82 mm (2.3″ × 2.3″ × 3.2″) |
| Weight | Approx. 470 g (1.0 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –30 °C to 50 °C (–22 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| General | |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, and 32/64-bit Linux |
| Compatibility | GigE Vision V2.0, GenICam |
| Certification | CE, RoHS, KC |
| HIKROBOT part no. | M000080840 |
| Status | Available |
Key features
- Adopts InGaAs sensor and supports spectral imaging of 0.4 μm to 1.7 μm.
- Supports TEC to provide good cooling effect.
- Multiple ISP functions like digital noise reduction, contrast ratio, etc.
- Adopts compact structure and design to meet spatial requirements.
- Compatible with GigE Vision V2.0 Protocol, GenICam Standard, and third-party software based on the protocol and standard.
Where it is used
The InGaAs sensor’s 0.4-1.7 μm spectral range and TEC-cooled stability suit spectral imaging on continuously running production lines, material sorting/differentiation, and applications needing long, uninterrupted duty cycles; it is built for SWIR-based imaging inspection, not thermal temperature measurement.
Suitability depends on working distance, field of view, target characteristics and positioning. Selection is assessed on a per-project basis.
Is this camera right for your application?
Let us determine resolution, interface, lens and illumination together, based on your application. FST is HIKROBOT’s distributor in Türkiye; product selection, commissioning and after-sales support all come from one source.
The data herein may vary based on the environment, objects and other various factors, and HIKROBOT shall not assume the consequences arising therefrom.
Source: HIKROBOT product data