← Line Scan Camera
HIKROBOT MV-CL084-91Y2M(V2.0)
8k 7μm, CXP-10 2link, mono
Key Features
- Provides a transmission distance of up to 100 m without a repeater via the GigE interface.
- Supports gain and exposure control, LUT, Gamma correction, etc.
- Compact design for flexible installation.
- Compatible with GigE Vision Protocol V2.0, GenlCam Standard, and third-party software based on the protocol and standard.
Detailed Parameters
| Client Software | MVS or other frame grabber softwares corresponding to CoaXPress protocol |
| Operating System | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Compatibility | CoaXPress, GenlCam |
| Sensor Type | CMOS |
| Pixel Size | 7 µm × 7 µm |
| Max. Line Rate | 1-light mode: 200 kHz (1-Line), 100 kHz (2-TDI), 50 kHz (4-TDI) 2-light mode: 52 kHz (1-Line), 26 kHz (2-TDI) 3-light mode: 34.6 kHz (1-Line) 4-light mode: 26 kHz (1-Line) |
| Image Mode | Supports multi-light control: 1/2/3/4 light(s) Supports 1-Line, 2-TDI, and 4-TDI |
| Dynamic Range | 63.4 dB |
| SNR | 40.8 dB |
| Exposure Time | 3 μs to 10 ms |
| Exposure Mode | Off/Once/Continuous exposure mode, and supports trigger-width exposure |
| Mono/Color | Mono |
| Pixel Format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse Image | Supports horizontal reverse image output |
| Trigger Mode | External trigger, internal trigger |
| External Trigger Mode | Line trigger, frame trigger, line + frame trigger |
| Transmission Mode | 1 Link, 2 Link |
| Data Interface | CXP-10 with two Micro-BNC interfaces |
| Digital I/O | 12-pin P10 connector provides power and I/O: Configurable input/output × 4 (Line 0/1/3/4), and single-ended/differential is supported. |
| Power Supply | 12 VDC to 24 VDC, CXP-0 and CXP-1 support PoCXP |
| Power Consumption | Typ. 15.5 W @ 24 VDC |
| Lens Mount | M72*0.75, flange back length 12 mm, applicable to F-mount lens via adapter ring |
| Dimension | 132 mm × 76 mm × 51.4 mm (5.2" × 3.0" × 2.0") |
| Weight | Approx. 520 g (1.1 lb.) |
| Ingress Protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 50 °C (–4 °F to 122 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Certification | CE, RoHS, KC |
Datasheet