← Line Scan Camera
HIKROBOT MV-CL083-92CC(V2.0)
8k pixels Linescan Cameras, Camera Link, Color
Key Features
- Provides a transmission distance of up to 100 m without a repeater via the GigE interface.
- Supports gain and exposure control, LUT, Gamma correction, etc.
- Compact design for flexible installation.
- Compatible with GigE Vision Protocol V2.0, GenlCam Standard, and third-party software based on the protocol and standard.
Detailed Parameters
| Client Software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating System | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V1.2, GenICam |
| Sensor Type | CMOS |
| Pixel Size | 7 μm × 7 μm |
| Max. Line Rate | 10.1 kHz (Base), 20.2 kHz (Medium), 33.7 kHz (80-bit) Increases line rate via ROI: Max. 66.6 kHz (4140 resolution and below) |
| Image Mode | Supports 1-line |
| Dynamic Range | 63.4 dB |
| SNR | 40.8 dB |
| Gain | Supports 1.0 × |
| Exposure Time | 3 μs to 10 ms |
| Exposure Mode | Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure |
| Mono/Color | Color |
| Pixel Format | Mono 8/12, RGB 8, BGR 8 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse Image | Supports horizontal reverse image output |
| Trigger Mode | External trigger, internal trigger |
| External Trigger Mode | Line trigger, frame trigger, line + frame trigger |
| Configuration Mode | Base, Medium, 80-bit |
| Tap Number | 1 Tap, 2 Taps, 10 Taps |
| Pixel Clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Data Interface | Camera Link; USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power Supply | 12 VDC to 24 VDC |
| Power Consumption | Typ. 9.9 W @ 12 VDC |
| Lens Mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Dimension | 76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7") |
| Weight | Approx. 340 g (0.75 lb.) |
| Ingress Protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 55 °C (–4 °F to 131 °F) Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Certification | CE, RoHS 2.0, KC |
Datasheet