TELEMECANIQUE XS130B3PCM12 — Flush Cylindrical Inductive Sensors
Telemecanique XS130B3PCM12: Inductive proximity sensor, M30, flush, Sn 15 mm, PNP 1 NO + 1 NC, M12 connector, 12–24 V DC.
Status: In production
Brand: Telemecanique
Product: Inductive proximity sensor, M30, flush
Sensing distance (Sn): 15 mm
Output: PNP, 1 NO + 1 NC
Connection: M12 male connector, 4-pin
Supply: 12–24 V DC
Degree of protection: IP69K, IP65, IP67
The Telemecanique XS130B3PCM12 is an XS1-family inductive proximity sensor of the XS range with a cylindrical M30 x 1.5 threaded body. It is flush mountable in metal. Nominal sensing distance (Sn) is 15 mm, with an operating zone of 0–12 mm. Enclosure is nickel-plated brass, sensing face PPS; length 55 mm, threaded length 32 mm, net weight 0.1 kg. Differential travel is 1–15 % of the effective sensing distance; switching frequency is up to 500 Hz. The manufacturer lists mobile equipment as its device application.
Supply is 12–24 V DC (limits 9–36 V DC) with reverse polarity protection. The PNP 1 NO + 1 NC output switches up to 200 mA with overload and short-circuit protection; closed-state voltage drop is below 2 V and no-load current consumption is 0–10 mA. Connection is via a 4-pin M12 male connector; a yellow LED shows the output state. Degree of protection is IP69K (DIN 40050), IP65 (IEC 60529) and IP67; operating temperature is -25 to +70 °C. Safety levels: SIL 2 (IEC 61508), PL d (ISO 13849-1), SILCL 2 (IEC 62061); service life 20 years.
Telemecanique XS130B3PCM12 technical specifications
| General | |
|---|---|
| Series | XS1, general purpose |
| Body design | Cylindrical, M30 x 1.5 thread |
| Mounting | Flush mountable |
| Safety level | SIL 2 (IEC 61508), PL d (ISO 13849-1), SILCL 2 (IEC 62061) |
| Safety reliability data | MTTFd = 1810 years; PFHd = 62.9E-9 1/h; SFF = 92 %; DC = 74 % with appropriate safety controller; service life 20 years |
| Detection | |
| Nominal sensing distance (Sn) | 15 mm |
| Operating zone (Sa) | 0–12 mm |
| Differential travel | 1–15 % of effective sensing distance (Sr) |
| Switching frequency | ≤ 500 Hz |
| Electrical characteristics | |
| Rated supply voltage | 12–24 V DC with reverse polarity protection |
| Supply voltage limits | 9–36 V DC |
| Current consumption (no-load) | 0–10 mA |
| Voltage drop (closed state) | Below 2 V |
| Delays (maximum) | First-up 5 ms; response 0.3 ms; recovery 0.7 ms |
| Outputs and indicators | |
| Output type | PNP, 1 NO + 1 NC, DC |
| Wiring technique | 4-wire |
| Switching capacity | ≤ 200 mA with overload and short-circuit protection |
| Status LED | Output state: 1 yellow LED |
| Mechanical and connection | |
| Electrical connection | M12 male connector, 4-pin |
| Enclosure material | nickel-plated brass |
| Sensing face material | PPS |
| Length / threaded length | 55 mm / 32 mm |
| Net weight | 0.1 kg |
| Minimum mounting distances | Side by side ≥ 30 mm; face to face ≥ 180 mm; facing a metal object ≥ 45 mm |
| Environmental | |
| Degree of protection | IP69K (DIN 40050), IP65 (IEC 60529), IP67 |
| Operating temperature | -25 to +70 °C |
| Storage temperature | -40 to +85 °C |
| Vibration resistance | 25 gn, amplitude ±2 mm (f = 10–55 Hz), IEC 60068-2-6 |
| Shock resistance | 50 gn for 11 ms, IEC 60068-2-27 |
| Marking and certifications | CE; CSA, E2, UL, TÜV |
Key features
- Sn 15 mm, flush mountable, M30 x 1.5 thread
- PNP 1 NO + 1 NC output, up to 200 mA, overload and short-circuit protected
- 12–24 V DC supply with reverse polarity protection
- Nickel-plated brass enclosure, PPS sensing face
- Degree of protection IP69K, IP65, IP67
- Safety levels SIL 2, PL d and SILCL 2
XS130B3PCM12 ordering codes
| Part number | Description |
|---|---|
| XS130B3PCM12 | PNP, 1 NO + 1 NC, M12 connector |
| XS130B3PCL2 | PNP, 1 NO + 1 NC, 2 m cable |
| XS130B3PAL2 | PNP, 1 NO, 2 m cable |
| XS130B3PAM12 | PNP, 1 NO, M12 connector |
| XS130B3NAL2 | NPN, 1 NO, 2 m cable |
| XS130B3NAM12 | NPN, 1 NO, M12 connector |
| XS130B3PBL2 | PNP, 1 NC, 2 m cable |
| XS130B3PBM12 | PNP, 1 NC, M12 connector |
XS130B3PCM12 accessories
Accessories listed by the manufacturer for this product (ordered separately):
| Part number | Description |
|---|---|
| XSZB130 | Fixing clamp for Ø30 mm XS inductive sensors, plastic, with indexing |
| XSZBS30 | Mounting bracket for Ø30 mm XS inductive sensors, stainless steel |
| XZCP1141L5 | Pre-wired connector XZ, straight female M12, 4-pin, PUR cable, 5 m |
| XZCP1241L5 | Pre-wired connector XZ, elbowed female M12, 4-pin, PUR cable, 5 m |
Other Telemecanique Flush Cylindrical Inductive Sensors
- TELEMECANIQUE XS108B3PAL2 — Inductive proximity sensor, M8, flush
- TELEMECANIQUE XS112B3PAL2 — Inductive proximity sensor, M12, flush
- TELEMECANIQUE XS118B3PCM12 — Inductive proximity sensor, M18, flush
- TELEMECANIQUE XS1N18PA349 — Inductive proximity sensor, M18, flush
- TELEMECANIQUE XS1N30PA349 — Inductive proximity sensor, M30, flush
- TELEMECANIQUE XS508B1PAL2 — Inductive proximity sensor, M8, flush
- TELEMECANIQUE XS512B1PAM12 — Inductive proximity sensor, M12, flush
- TELEMECANIQUE XS612B1PAL2 — Inductive proximity sensor, M12, flush
- TELEMECANIQUE XS618B1PAM12 — Inductive proximity sensor, M18, flush
- TELEMECANIQUE XS630B1PAL2 — Inductive proximity sensor, M30, flush
Models from other brands: Flush Cylindrical Inductive Sensors
Is this inductive sensor right for your application?
Share the metal target to be detected (material, size), the required sensing distance, the mounting type (flush / non-flush), ambient conditions (oil, coolant, washdown, temperature) and your PLC input (PNP/NPN, NO/NC); let’s select the right inductive sensor and connection cable together.
All product specifications are subject to change without notice. Source: Telemecanique Sensors, XS130B3PCM12 product data sheet (https://downloads.telemecaniquesensors.com/dam/datasheets/en/XS130B3PCM12_EN.pdf, 30 July 2024); reference page https://www.telemecaniquesensors.com/global/en/product/reference/XS130B3PCM12; XS catalogue TESEBRO000040EN (accessed 28 September 2026).