← Mid-to-High End Smart Camera
MV-SC3050M-12M-WBN

MV-SC3050M-12M-WBN

SC3000 series vision sensor，12mm focal length，5MP，Mono
Key Features
  • Uses an embedded hardware platform for high-speed image processing.
  • Adopts built-in positioning and measurement algorithms to object’s existence, quantity, location, etc.
  • Multiple I/O interfaces for input and output signals.
  • Multiple indicators to show device status.
  • Uses a light source to provide uniform brightness across the illuminated area.
  • Supports multiple communication protocols, including Serial Port, TCP, UDP, FTP, Profinet, Modbus, etc.
Detailed Parameters
Product ModelMV-SC3050M-12M-WBN
TypeSC3000 series vision sensor，12mm focal length，5MP，Mono
Vision toolCount: Spot count, edge count, pattern count, contour count; Defect detection: Exception detection; Existence: Circle existence, line existence, spot existence, edge existence, pattern existence, contour existence; Location: Match calibration, match location, position fixture; Logic tool: If module, condition judge, logic judge, combination judge, string comparison, calculator; Measurement: L2L angle, diameter measurement, brightness analysis, contrast measurement, width measurement, P2L measurement, greyscale size, line angle, edge width measurement; Recognition: OCR, code recognition, classification registration, object detection registration; Deep learning: DL object detection, DL classification
Solution capacitySupports solution importing and exporting, up to 32 solutions and 40 modules can be stored.
Communication ProtocolRS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV
Sensor TypeCMOS, global shutter
Piksel Boyutu3.2 µm × 3.2 µm
Sensor Size1/1.7″
Resolution2368 × 1760
Max. Frame Rate30 fps
Dynamic Range71.4 dB
Signal/Noise41 dB
Gain0 dB to 18 dB
Exposure Time16 μs to 1 sec
Pixel FormatMono 8
Mono/RenkliMono/Siyah-Beyaz
Data InterfaceFast Ethernet
Digital I/O17-pin M12 connector provides power, Ethernet, digital I/O, and serial port: Input signal × 2 (Line 0/1), output signal × 3 (Line 5/6/7), bi-directional I/O × 3 (Line 2/3/4), and external button input × 1. Output signal can be set as NPN or PNP.
Power Supply24 VDC
Max. Power ConsumptionApprox. 48 W@24 VDC
Lens MountM12-mount, mechanical autofocus lens
Focal Length12.4 mm (0.5″)
Lens CoverTransparent lens cap. Polarization or infrared filter lens cap is optional.
Light SourceWhite light by default. Red/blue/near-infrared is optional.
IndicatorPower indicator (PWR), network indicator (LNK), status indicator (STS), result indicator (OK/NG)
Dimensions65.2 mm × 65.2 mm × 47 mm (2.6″ × 2.6″ × 1.9″)
WeightApprox. 280 g (0.6 lb.)
Protection ClassIP67 (under proper installation of lens and wiring)
TemperatureWorking temperature: 0 °C to 50 °C (32 °F to 122 °F); Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
Humidity20% to 95% RH, non-condensing
Client SoftwareSCMVS
CertificationCE, FCC, KC